CamBall XM

Specifications

Weight: 2.9kg(S) – 3.1kg(XM)
Dimensions: W.166mm, H.222mm, D.206mm (+ connectors)
Data: RS485, Dstar, DMX, Free-D, Mstar
Power: 12-16v @ 1A

Pan Range: 360deg. Continuous. (DMX 720 deg.)
Tilt Range: +/- 120deg from vertical.
Pan Speed Range: <0.05deg/sec - >180deg/sec.Other ratios on request.
Tilt Speed Range: <0.03deg/sec - >120deg/sec.Other ratios on request.

Accuracy: 0.0055deg (positional) <0.005deg (joystick)
Pre-Set Positions: 64, 16bit accuracy (+/- 0.0055deg. theoretical) 

Other features: Profile Move with Ramp Up, Ramp Down, Total Time, Pan/Tilt Speed, proportional to zoom angle, LCD status screen, Tally Light

Camera Sensor: 0.36” NMOS
Active Pixels: 2.38 Mpixels
Sig /Noise Ratio: >50dB 

HFOV: 30x zoom – 64deg. to 2.3deg
MOD: <30cm
Distortion: <3% (wide)  
Iris: F1.6 - F28 
Sensitivity: 30x 1.4 lux. (F1.6 AGC On)

HD Standards: 1080i/50/60, 720p/50/60, 1080p/50/60 HDSDI 

Connections:

  • XLR4 - Power & RS485 data

  • BNC1 – HDSDI

  • BNC2 – Genlock


Remote: Pan, Tilt, Zoom, Iris, Focus, Auto / Manual White, Preset White, Rgain,Bgain, Master Pedestal, Red Pedestal, Blue Pedestal, Shutter, Gain, Gamma, Dzoom On/Off, Auto Iris On/Off, Auto Focus On/Off, IR Mode On/Off, Chroma, Detail, Shading, Knee, WDR, RGB balance, Output Standard etc.Preset Store (P,T,Z,F), Preset Recall, GoTo Absolute Position,P,T reverse, speeds 1-10, Turbo Speed, ND Filter.

Operating Temp: -10 to >+40degC Out of sunlight 
Sealed: IP65 minimum (IP66 option)
Mounting: 2 x 3/8”, 2 x 1/4” + safety bond point

‘DMX Control’: 

  • 8 channels - Pan (2Ch), Tilt (2Ch), Zoom (2Ch), Focus (1Ch), Iris (1Ch)

  • 16bit positioning – 720deg. Pan

Specifications subject to change without notice E & OE