CB180 Camera

The CB180 is a multi-function outdoor remote controlled camera. It has been designed to capture live pictures in extremely demanding situations out of doors, including from moving platforms. It can be used on a boat or telescopic pole, while the cameraman can operate the camera from a remote studio or edit suite.

This camera is rated to both IP66 and IP67, which means that it resists water from high pressure jets AND withstands full immersion in water. We have added a roll axis and stabilisation so this camera can shoot from non-stable platforms, such as the deck of a yacht, and automatically maintain a level horizon. The three axes of physical movement – pan, tilt and roll – can all have their stabilisation switched on or off, individually.

This camera offers positional metadata, smart profile moves, DMX control and advanced CCU control, so a vision engineer can adjust the camera remotely and match its pictures to AR or VR in a professional production.

We’ve also added a hidden wash and wipe feature to clean the lens, as well as stabilisation to steady the camera when it’s used in motion.

For more details, please download the CB180 brochure.

AC180

  • Waterproof and Submersible
  • 3-axis: Pan, Tilt and Roll
  • Horizon Stabilised in Pitch and
  • Roll
  • Wash-wipe System
  • 64 Pre-programmed Moves
  • Output to 1080p
  • 12bit Digital Signal
  • Processing
     
  • Enhanced CCU Control
  • 30x Optical Zoom
  • Slip Rings
  • Switchable to Infra-Red
  • Sensitive
  • 5 Axes of Metadata Output
  • Weight: 3.5kg
    Dimensions: Diameter 180mm, H.222mm
    Operating Temp: -10 to +40degC Out of sunlight
    Environmental: IP66 & IP67
    Mounting: 6 x M6 bolt holes
    Connections: Customer specification
    Power: 12-16v @ 1A

    Data: RS485
    Metadata: Free-D RAW, Free-D Angular

    Pan Range: 360deg. Continuous
    Tilt Range: +/- 120deg from vertical.
    Pan Speed Range: <0.05deg/sec - >180deg/sec. Other ratios on request.
    Tilt Speed Range: <0.03deg/sec - >120deg/sec. Other ratios on request.
    Speed Ranges (Gears): 10
    Speed Proportional: Pan/Tilt Speed, proportional to zoom angle on ranges 1-3
    Pre-Set Positions: 64
    Positional Accuracy: 0.0055deg.
    Profile Moves: 64
    Profile Move Adjustments: Ramp Up, Ramp Down, Total Time, Zoom Start +/-, Zoom End +/-
    Camera Sensor: 0.36” NMOS, 12bit DSP
    Active Pixels: 2.38 Mpixels
    Signal / Noise Ratio: >50dB
    HDSDI Standards: 1080i/50/59.94/60, 720p/50/60, 1080p/23.97/24/25/29.97/30/50/59.94/60
    Zoom: 30x optical
    HFOV: 64deg. to 2.3deg
    MOD: <30cm
    Distortion: <3%
    (wide) Iris: F1.6 - F28 – 256 steps
    Sensitivity: 1.4 lux. (F1.6 AGC On)

    PTZ Remote: Pan, Tilt, Zoom, (fully proportional,) Iris, Focus, (positional), Pre-set Store (P,T,Z,F), Pre-set Recall, Profile Move Time, Profile Move Ramp Up, Profile Move Ramp Down, Profile Move Zoom Offsets, Absolute Position mode, P,T,Z,F reverse, speeds 1-10, Turbo Speed, Set Home, Goto Home, etc.

    CCU Remote: Auto / Manual White, Pre-set White, Rgain, Bgain, Master Pedestal, Red Pedestal, Blue Pedestal, Shutter, Gain, Micro Gain, Gamma, Digital Zoom On/Off, Auto Iris On/Off, Auto Focus On/Off, IR Mode On/Off, Chroma, Detail, Shading, Knee, WDR, Dynamin Noise Reduction, Dynamic Range, RGB balance, Output Standard, ND Filter, Colour Bars, etc.

    Other Features: Genlock, Enhanced CCU Control, Slip Rings, Inverted or Upright Mounting, Switchable to Infra-Red sensitive, LCD status/diagnostic screen (internal)

    Specifications subject to change without notice
    E & OE  
    For more information please download the CB180 brochure

    We offer full engineering support and engineering services to integrate this camera with your existing infrastructure.
    Questions? Call +44 (0) 1590 622440

    Compatible products include:                        

    Joystick Controllers                                     

    Remote Camera Panels

    Radio data links

    Fibre Converters

    IP Converters

    Camera Automation System