RD-12 Radio Data Receiver

RD12 Ancillaries Broadcast for TV and Films RD12 Ancillaries Broadcast for TV and Films RD12 Ancillaries Broadcast for TV and Films RD-12 Broadcast Remote Ancillaries for film and television

The RD-12 is the compliment to our RD-11 Data Transmitter.  As small as it can be with the Lemo connectors and the antenna.

All the configuration is done through the RD-11 and it has several different control protocols built-in.  When used as a camera CCU controller, it uses just a single cable which carries both power and data.

For further information on the RD-12 Radio Data Receiver download the RD-12 Radio Data Receiver Brochure

  • 10 user selectable channels
  • CCU control or data tranmission
  • Ultra thin design
  • Menu Control
  • 10mW, 25mW & 500mW output power
  • User selectable protocols
  • 868Mhz (EU) and 915Mhz (USA) versions
  • Single cable connection to camera
  • Power: 9 - 24v @ 0.5W max.
    Data In/Out:
  • RS485
  • 4,800 baud, 9,600baud, 19,200baud, 38,400baud
    Dimensions: 88mm x 60mm x 12.7mm 100 Grams
    Connections:1 x Lemo 4pin, 1 x Lemo 7pin.
    Over Air: 4,800baud, 9,600baud or 38,400baud, depending on channel

    Outputs:
  • RS232, TTL, RS485, RS422
  • 4,800 baud, 9,600baud, 19,200baud, 38,400baud

    Options:
  • Custom Yagi antenna
  • Lens driver modules
  • Servo driver modules
  • CCU protocol modules, Sony, Ikegami, Panasonic, Toshiba, JVC.
  • For further information on the RD-12 Radio Data Receiver download the RD-12 Radio Data Receiver Brochure

    For further support on the RD-12 Radio Data Receiver download the RD-12 Radio Data Receiver Instruction Manual

    For further support on the RD-12 Radio Data Receiver download the following pdfs:

  • RD-12 Camera Protocol Configuration Instructions>
  • RD-12 Connection Example